活性アルミナ乾燥剤

ホーム /
アルミナ /
アルミナの利用用途 /
活性アルミナ乾燥剤

Active aluminum oxide dehydrator, from heat-free compressed air driers and gas-dehydrators to air-separating and petroleum-based treatment plants, provides a deep, dependable water-removing capability – providing a high crushing strength, a steady absorption capability and complete regeneration in the most demanding ongoing industry drying operations.

What Is Activated Alumina Desiccant?

Activated alumina desiccant is a highly porous type of aluminum oxide (Al₂O₃), which is specially processed to form a large internal surface area and an interconnected pore network. This structure enables it to adsorb water molecules from gas and liquid streams with high efficiency. Produced via the controlled dehydration of aluminum hydroxide, activated alumina desiccant usually has a surface area ranging from 200 to 360 m²/g, which provides the necessary adsorption capacity for deep drying applications in various industrial processes.

Different from single-use desiccant materials, activated alumina desiccant can be fully regenerated thermally. It is heated to a controlled temperature between 150°C and 300°C to remove the adsorbed moisture, thereby restoring the material to its original adsorption capacity. This regenerable feature makes it the preferred desiccant for continuous industrial drying systems, where long service life, predictable performance, and low per-cycle operating cost are key operational priorities.

Activated alumina desiccant is widely used in compressed air drying systems, natural gas and liquefied natural gas (LNG) dehydration, petrochemical process gas drying, air separation unit feed preparation, instrument air treatment, and industrial liquid-phase dehydration applications. Its combination of deep drying performance, mechanical durability, and regenerability makes it the standard desiccant medium in fixed-bed pressure swing adsorption (PSA) and temperature swing adsorption (TSA) dryer systems across the process industries.

Key Advantages of Activated Alumina Desiccant

Deep Dew Point Depression for Critical Drying Applications: Under appropriate operating conditions, activated alumina desiccant can stably achieve outlet dew points as low as -40°C to -70°C, which fully meets the strict moisture specifications required for instrument air systems, air separation feed gas preparation, and sensitive petrochemical and pharmaceutical process gas streams.
Full Thermal Regenerability for Continuous Low-Cost Operation: Contrary to the degradation of the silica gel or the molecular screen desiccant, the active aluminum oxide retains its ability to adsorb steadily over the course of tens of thousands of pressurized and regenerative cycles – providing a predictable long term performance and a significant reduction in the cost of replacing the desiccant during the ongoing PSA and TSA drying process.
High Mechanical Strength Resistant to Attrition and Crush Failure: Made to a high compression strength standard, active aluminum oxide desiccant can withstand the mechanical stresses of pressurized, decompressed, and gas flow rates in a fixed bed dryer container – minimizing the formation of fines, bed channeling, and pressure drop rise during long operating times in a high cycle CNG and GAS-DRYING system.
Broad Operating Condition Compatibility Across Temperature and Pressure Ranges: Active Aluminum Oxide Desiccant Can Be Used in Various Input Temperatures, Pressures, and Humidity Levels. Active Aluminum Oxide Desiccant Keeps Stable Wet Absorption Capability in Various Operational Environments Typically Used in Industrial, Natural, Natural Gas Collecting Operations, and Process Gas Treating Plants at Site and Refinery Sites.
Chemical Stability in Hydrocarbon and Acid Gas Environments: The intrinsic chemical inertia of active aluminum oxide enables it to degrade in the presence of light hydrocarbons, carbon dioxide, and medium concentrations of acidic gases – preserving the structure and absorption properties in the flow of natural gas and petroleum products that are not chemically stable.

業界が直面する課題

Increasingly stringent outlet dew point specifications

Modern compressed air, instrumentation, and process gas applications need a constant low exit dew-point which requires a desiccant material that can remove moisture deeply at varying input humidity and flow.

Mechanical degradation from high-cycle pressurization and depressurization

Repetitive pressure swing cycles in a PSA dryer system produce a mechanical stress which results in a poor quality of the drying agent to break down, attract, and produce a fine – which results in a lower bed pressure and a decrease in the effectiveness of the system.

Desiccant capacity loss from hydrocarbon and contaminant fouling

Light hydrocarbons, compressor oils, and particles in the CNG and NG flows cover the drying agent’s face and block the entrance to the hole – gradually decreasing the absorption capability and decreasing the useful lifetime of the exchange.

製品概要

Specific Use Scenarios — Activated Alumina Desiccant

Compressed Air Drying Systems

Active aluminum oxide desiccator is a standard bed for non-thermal, hot, and hot – pressure HVAC systems that are applied throughout the production industry, medicine industry, food industry, and other industries. It removes water from the compressed air flow to the low dew-point needed for downstream pneumatic devices, instruments, and process applications – keeping a constant output dew-point performance over hundreds of times of pressurized and regenerative cycles with no substantial loss of volume or mechanical deterioration.

Natural Gas and Pipeline Gas Dehydration

During the collection, transport and treatment of natural gas, the water content of the gas flow leads to the formation of hydrate, the corrosion of the pipe, and the subsequent treatment. Active aluminum oxide drying beds installed in well heads, compressor stations, and gas treatment plants eliminate moisture to pipe specifications – offering a reliable dewatering capability over varying flow rates, pressures and intake gas components typically associated with on-site gas handling and transfer operations.

Liquefied Natural Gas Feed Gas Preparation

LNG production needs to be kept at a very low temperature so as to avoid the build-up of ice and water in low-temperature heat-transfer and liquidizing facilities. Active aluminum oxide desiccator is employed as a main or guard bed drying medium in the pre-conditioning phase of an LNG train – to transport the deep dew-point drop needed prior to entry into the Molecular Screen Dehydrating Device and Lower Cold Treatment Phase.

Air Separation Unit Feed Air Drying

The O2, N2, and Ar gas separation units need to be air-dried to extremely low humidity levels prior to entry into the low-temperature separating tower. Active aluminum oxide drying agent is installed in the prepurifying unit of an air-separator to eliminate the bulk humidity in the pressurized supply air-protection system – to prevent early water-loading on the downstream side and to keep the low temperature separating process running smoothly and continuously.

Petrochemical and Refinery Process Gas Drying

In oil refinery and petrochemical production, the water in the flow of the flow of hydrogen, ethylene, propene, etc. can disrupt the catalyst reaction, facilitate the corrosion of the device, and cause the quality of the product to deteriorate. Active aluminum oxide desiccator is located in a refinery and a petroleum-chemical process train to dry a feed flow prior to its entry into a reactor, a separator, or a downstream treatment facility – keeping the humidity level needed for the properties of the catalyst and its product.

Instrument Air and Utility Air Treatment

The industrial plant that operates the pneumatic, security, and process control devices need the apparatus to be air-dried to a sufficiently low dew-point so as to avoid the formation of moisture in the instrument pipe, the valve actuator, and the control elements. Active Aluminum Dehydrator offers the dependable, sustained deep-drying capability required by Instrument Air Spec – Safeguarding Key Flow Control and Security Systems Integrity in Chemical Factories, Refineries, Electric Plants, and Industrial Fabrication Installations.

Liquid-Phase Dehydration of Solvents and Process Liquids

In addition to gas phase drying, active aluminum oxide can be employed as a fixed bed desiccator for removal of dissolved water in an organic solvent, an TFO, a hydraulic fluid and a special chemical process flow. The combination of their chemistry with a wide variety of organic fluids, coupled with their high water-absorbing capability and regenerative properties, allows them to be used as an efficient liquid-phase drying medium for those applications that require lower moisture levels than those that can be achieved with traditional distillation or separating techniques.

Our Activated Alumina Desiccant Advantages

Deep Dew Point Performance Across Demanding Drying Applications

Active aluminum oxide desiccant consistently achieves exit dew points as low as - 40 ℃ - 70 ° C providing the deep humidity removal needed by the instrumentation air system, the air-separating feed preparation, and the sensitive petrol-chemical process flow for which the humidity specification is essential.

Full Thermal Regenerability for Long Service Life and Low Operating Cost

Different from disposable drying agents, active aluminum oxide recovers the entire absorption capability by means of a controlled heat recovery - keeping a steady drying performance over several tens of millions of absorption and recovery cycles, and a significant reduction in the rate of exchange of the desiccant and the overall operational cost for the PSA and the TSA drying system.

High Crush Strength Resistant to Mechanical Degradation in High-Cycle Systems

Made to a high-compression strength standard, active aluminum oxide desiccant can withstand the repetitive pressurisation, decompressing, and gas-stream stresses of a continuous dryer operating - in compression and industry gas-drying applications, to minimise the formation of fines, flow of the bed, and an increase in pressure.

すべての活性炭のカテゴリーを検索

Desiccant drying is one of many applications where activated alumina delivers proven industrial performance. We have a wide variety of aluminum oxide products that exceed the drying agent class to cover the catalytic carrier, the fluorine removal, and the special aluminum oxide material that is tailored to the various technological needs. Look at the full catalogue of aluminum oxide products to compare grades, sizes, and properties – and look for an appropriate aluminum oxide solution for each of your operations.

すべての産業向けソリューションを検索

Drying the drying agent is one component of the wider industry process picture. Reliability is dependent on the correct mix of materials – from active aluminum oxide and special drying agents to active carbon and titanium dioxide. Look at our industrial solutions and find out how they combine to solve the complicated problems of drying, cleaning, and manufacturing.

梱包・物流サービス

安全でカスタマイズ可能な梱包

製品は、輸送中の清潔さと完全性を確保するため、耐久性があり防湿性のあるパウチまたはバルク容器に収納されるものとします。特殊なサイズや取り扱い要件に合わせた、カスタマイズされた梱包オプションもご用意しています。.

信頼性が高く、柔軟なグローバル配送

信頼できる物流パートナーと連携し、海上、航空、陸路の各輸送手段に対応した柔軟な配送体制を提供しています。世界中の目的地へ、迅速かつ安全に貨物を配送いたします。.

注文・サポートの専任調整

弊社では、注文の確定から最終出荷に至るまでの追跡および記録について、特別なサポートを提供しています。サプライチェーンの円滑な運用を保証するため、技術面および物流面でのサポートもご用意しております。.

あなたにぴったりの産業用ソリューションを見つけませんか？

ご注文方法！

詳細なご質問をお送りいただくか、お客様の活性炭のご要件に合わせたお見積もりをご依頼ください。.

製品の詳細、価格、納期などが記載された詳細な提案書をご請求ください。.

ご注文内容をご確認の上、安全な決済手続きをお進めください。.

ご注文は、迅速に処理・丁寧に梱包され、速やかに発送されます。.

配信に集中してください。何かありましたら、遠慮なく当社のテクニカルサポート担当者までご連絡ください。.

今すぐお問い合わせ！

個別のお見積もりや技術サポートをご希望の方は、今すぐお問い合わせください。.

活性アルミナ乾燥剤

What Is Activated Alumina Desiccant?

Key Advantages of Activated Alumina Desiccant

業界が直面する課題

製品概要

アルミナ

アルミナ

アルミナ