飲料水処理用活性炭

ホーム /
活性炭 /
活性炭の用途 /
水処理用活性炭 /
飲料水処理用活性炭

Active Carbon is a world standard for purifying potable water. It can be used to eliminate chlorine, chloramines, disinfectant by-products, flavour and odour compounds, pesticides, drugs and PFAS – providing safe, clean, regulated potable water through a city’s wastewater treatment facility, point of entry, and home filtering applications throughout the world.

What Is Drinking Water Treatment Activated Carbon?

Active Carbon in Potable Water Treatment is a process in which Particulate (GAC), Dust (PAC), and Specialized Active Carbon are applied in a municipal wastewater treatment facility, a distributed water distribution system, as well as a point of use filter equipment for removal of chemical contamination, flavour and odour, as well as controlled pollution from the source water prior to its delivery to the consumer.

Active carbon has been a key element in the treatment of potable water for decades, and it is becoming increasingly important as the problem of groundwater quality becomes more acute. The world’s surface and ground water is under increasing pressure from the agriculture run-off with pesticides and nitrates, the waste of sewage, the pollution of industry, and the natural flavour and odour of the natural world – such as Geosmin and 2-Methylisoborol (MIB) – which render the treated water unpalatable despite its microbiological safety. At the same time, regulators such as the U.S. EPA, European Commission, and the National Drinking Water Administration have been steadily reducing MCLs for a growing range of chemicals — the latest one that has set legally binding limits at parts per billion for PFAS. Active Carbon continues to be a proven, cost effective and workable technique to satisfy such changing regulatory requirements at municipal and lower levels.

Key Advantages of Drinking Water Treatment Activated Carbon

Effective Chlorine and Disinfection Byproduct Removal: Active carbon quickly dehydrate after treatment and adsorb THMs (THMs), HAAs, and other sterilization by-products that are produced in the course of chlorine-reducing both the flavor effect of remaining disinfectants and the long term health hazards related to exposure to DBP in distributed potable water.
Reliable Taste and Odor Control: GAC and PAC are excellent at eliminating the natural flavor and odour components from algae and actinomyces that are found in the source water tanks – the main cause of consumer complaints about the quality of urban drinking water and the main reason for the use of activated carbon equipment in water-treatment facilities around the world.
PFAS and Emerging Contaminant Compliance: The PAC is a U.S. EPA-recognized, worldwide approved technique for removing PFOA, PFOS and associated substances from potable water, which can reliably reduce PFOA, PFOS and associated substances to less than the parts per billion currently implemented by the United States, the European Union, and the growing range of domestic regulations.
Pesticide and Pharmaceutical Removal: Active carbon can adsorb a wide range of agricultural pesticides, herbicides, and drug compounds from the ground, thus offering a key therapeutic barrier to prevent the occurrence of chemical pollution and chronic low levels of exposure that can not be properly dealt with by conventional coagulation and filtering techniques.
Scalable from Household to Municipal Applications: Available in granular, powdered, and block-based forms, potable water activated carbon scales from domestic pitcher and undersink units to large-scale communal GAC contactors – providing a consistent, compliant water-quality performance for each treatment scale using identical validated sorption techniques.

業界が直面する課題

Tightening Regulatory Standards for an Expanding Contaminant List

Throughout the world, MCLs are constantly being reduced, and the addition of new regulatory pollutants — PFAS — at a fraction of a trillion — is being imposed on water companies to invest in more sophisticated ACCC systems, which would have been impractical even 5 years ago.

Deteriorating Source Water Quality

Rising agriculture runoff, drug release, industry pollution, and the intensification of algae bloom have been steadily deteriorating surface and ground water quality, thus increasing the pollutant burden and processing complexity that active carbon systems have to deal with in order to ensure consistent safety of finished water.

Seasonal Taste and Odor Events Are Unpredictable

Both the algal and the actinomycete production of Geosmin and MIB cause unpredictable, fast onset, and urgent therapeutic response – a challenge for the utility to keep the active carbon capability and the operating flexibility needed to deal with an incident that could take several days or weeks.

製品概要

Specific Use Scenarios — Drinking Water Treatment Activated Carbon

Municipal Drinking Water Plant GAC Filtration

Granular ACF is mounted as a special processing phase in a municipal wastewater treatment facility — usually located following coagulation-settling, sand-filtering — in which the source water is transported via a GAC deep stationary bed which absorbs dissolved organic matter, chlorine, disinfectant by-product precursors, pesticides, and flavour and odour compounds prior to its entry into the distribution system. The GAC contactor is constantly running at a high velocity and is regularly backwashed to eliminate the accumulated solids, while the spent carbon is removed for off-site heat activation and operation.

Powdered Activated Carbon Dosing for Emergency and Seasonal Treatment

The use of PAC is a flexible, quick-response solution to the problem of seasonal flavour and odour due to algae blooms, farm run-off, or accidental pollution of the source. PAC is injected directly into a primary flow or a processing tank that is located upstream of an existing filter phase, absorbing geosmin, MIB, pesticides, and other pollutants with no special infrastructure — allowing utilities to increase or decrease their processing strength in real-time with seasonal fluctuations in the source water quality.

PFAS Removal from Municipal Water Supplies

The PAC is the largest installation and regulated technique for removing PFAS from urban potable water, and GAC contactors that can lower PFOA, PFOS and associated long chain PFAS compounds to less than the parts per billion MCLs currently implemented by the U.S. EPA and increasingly accepted by more and more countries. Utilities that are subject to a PFAS compliance requirement deploy GAC contactors either in serial or parallel configurations to reach a desired Empty Bed Contact Time (EBCT) to be lower than the detection threshold for the purpose of removing PFAS.

Dechlorination and Disinfection Byproduct Control

Because of its long term effects on the health of the environment, chlorine and chloramines are combined with the naturally occurring organic compounds in the source water to produce THMs, HAAs, and other disinfectant by-products. Active Carbon – in GAC filtration and PAC dosage forms – offers a high efficiency of depuration and elimination of DBP precursors, which decreases the generation potential of controlled sterilization by-products and enhances the taste and beauty of final potable water supplied via a distributor.

Point-of-Use Drinking Water Filtration

Active Carbon Filters (POU) – consisting of an undersink, a counter, an in-built fridge, and a pitcher-type filter – offer a focused approach to drinking and boiling water at the end of the shipment, eliminating chlorine, chloramines, lead, VOCs, cysts, and flavour/odour compounds to a level lower than the health guide. The Carbon Block and Granular Carbon Cartridge Forms are the most widespread used in Home Water Treatment Systems worldwide, providing customers an accessible, inexpensive path to improved drinking water quality without reliance on municipal infrastructure upgrades or bottled water alternatives.

Groundwater Treatment for Small Communities and Private Supplies

Private, small-scale community, and rural water sources from the shallow ground water table often suffer from the effects of agriculture pesticides, nitrates, VOC, and – near industry or military facilities – PFAS and solvent pollution above the safe level of potable water. Active Carbon Treating Systems – Dimensions and Configurations for Low to Medium Flow Rates – effectively remove pollutants from such Distributed Water Sources, allowing Small System Operators and Privately Owners to Obtain Safe, Compliant Potable Water Quality Without Being Connected to Urban Wastewater.

Our Drinking Water Treatment Activated Carbon Advantages

Proven Removal of the Widest Range of Drinking Water Contaminants

Active carbon deals with a wider range of regulatory and new pollutants from chlorine, THMs and HAAs to pesticides, drugs, geosmin, MIB, and PFAS at parts per trillion, than any other disposal technique — in one operational, validated filter phase.

Regulatory-Recognized Solution for PFAS and Emerging Contaminant Compliance

The U.S. EPA, European Union Potable Water Regulatory Agency (RSI) and other relevant national bodies have specifically approved GAC fixed bed systems as an approved PFAS and micro-pollution-removing process – providing water service providers a compliance-ready, defensible technological choice aligned with current and future enforceable drinking water standards.

Scalable Across Every Treatment Scale and System Configuration

Available in granular, powdered, and block-based forms, potable water activated carbon scales ranging from domestic pitcher and undersink units to large-scale GAC contactors – providing a consistent, compliant water-quality performance across all dimensions with identical validated sorption techniques.

すべての活性炭のカテゴリーを検索

Achieving consistent drinking water compliance begins with choosing the active carbon class exactly corresponding to your source water pollutant profile and management goals. We offer a wide variety of active carbon products including granular (GAC), dried (PAC), as well as special classes designed for urban plant processing, point of entry, and point of use filtering. Check out our full Active Carbon Inventory to determine what is appropriate for your Potable Water Treatment System.

すべての産業向けソリューションを検索

One of the key tasks for which modern chemical materials provide basic functionality is to provide safe drinking water. Regardless of whether you are involved in waste water treatment, industrial gas cleaning, air pollution control, food and drink handling, or environmental remediation, we use active carbon, aluminum oxide, titanium dioxide and other high performance materials for a wide range of processing applications. Search for appropriate materials and methods for your particular field and application needs.

梱包・物流サービス

安全でカスタマイズ可能な梱包

製品は、輸送中の清潔さと完全性を確保するため、耐久性があり防湿性のあるパウチまたはバルク容器に収納されるものとします。特殊なサイズや取り扱い要件に合わせた、カスタマイズされた梱包オプションもご用意しています。.

信頼性が高く、柔軟なグローバル配送

信頼できる物流パートナーと連携し、海上、航空、陸路の各輸送手段に対応した柔軟な配送体制を提供しています。世界中の目的地へ、迅速かつ安全に貨物を配送いたします。.

注文・サポートの専任調整

弊社では、注文の確定から最終出荷に至るまでの追跡および記録について、特別なサポートを提供しています。サプライチェーンの円滑な運用を保証するため、技術面および物流面でのサポートもご用意しております。.

あなたにぴったりの産業用ソリューションを見つけませんか？

ご注文方法！

詳細なご質問をお送りいただくか、お客様の活性炭のご要件に合わせたお見積もりをご依頼ください。.

製品の詳細、価格、納期などが記載された詳細な提案書をご請求ください。.

ご注文内容をご確認の上、安全な決済手続きをお進めください。.

ご注文は、迅速に処理・丁寧に梱包され、速やかに発送されます。.

配信に集中してください。何かありましたら、遠慮なく当社のテクニカルサポート担当者までご連絡ください。.

今すぐお問い合わせ！

個別のお見積もりや技術サポートをご希望の方は、今すぐお問い合わせください。.